|
Project Details |
||
|
Project name |
||
|
PVX Mounting System |
||
|
Building and Environment Data |
||
|
Building height (m) |
||
|
Largest side of building width or length (m) |
||
|
Heigt of roof parapet (m) |
||
|
Type of roofing material |
Bitumen |
|
|
Country |
||
|
Wind area |
||
|
Terrain category |
||
|
Application Data |
||
|
Type of application |
||
|
Roof zone |
||
|
Brand of application |
||
|
Article number of application |
||
|
Height of application (m) |
||
|
Widht of application (m)* |
||
|
Weight of application (kg/m) |
||
|
Page: 1/3 |
||
|
*For widths exceeding 300 mm, a minimum of two supports is required. Add one additional support for every extra 100 mm of width beyond 300 mm. Additional supports may be used for widths ≤ 300 mm if preferred. Please specify how many supports are placed side-by-side. |
||
|
When a mounting rail is used between the supports, what is its weight (kg/m) |
||
|
Cover included? |
||
|
Article number of cover |
||
|
Weight of cover (kg/m) |
||
|
Tubes? |
||
|
Diameter of tube(s) (m) |
||
|
Weight of tube (kg/m) |
||
|
Percentage (%) filled with cables |
||
|
Support spacing |
||
|
Prefferd support spacing |
||
|
Result |
||
|
Page: 2/3 |
||
|
Required number of units |
||
|
What is the total cable route length (m)? |
||
|
How much extra (%) for corners? |
||
|
Type of mounting system: |
||
|
Support spacing (m): |
||
|
Required quantity: |
||
|
Date: |
||
|
Version number: |
3.0 |
|
|
Disclaimers: |
||
|
This tool is intended to assist in calculating the supp spacing. Although we aim for accuracy, we make no guarantees regarding the completeness, correctness, or timeliness of the results. |
||
|
Users are solely responsible for providing accurate input to ensure valid results. |
||
|
We accept no liability for any decisions made based on the results of this tool, or for any direct or indirect damages resulting from its use |
||
|
The selection of 'brand of application' is provided solely for user convenience. No brand preference, endorsement, or affiliation is implied or intended by PVX Mounting Systems. |
||
|
Page: 3/3 |
||
|
Project Details |
|
|
Project name |
|
|
PVX Mounting System |
|
|
Application Data |
|
|
Type of application |
|
|
How will the cable route be placed? |
|
|
If horizontal: What is the distance measured from the cable route to the ridge (highest point) of the roof? |
|
|
Country |
|
|
Wind area |
|
|
Terrain category |
|
|
Type of roofing material |
|
|
If you choose 'Other', please specify: |
|
|
Result: |
|
|
Support spacing |
|
|
Required number of units |
|
|
What is the total cable route length (m)? |
|
|
How much extra (%) for corners? |
|
|
Type of mounting system: |
|
|
Support spacing: |
|
|
Minimum required quantity: |
|
|
Maximum required quantity: |
|
|
Date: |
|
|
Version number: |
3.0 |
|
Disclaimers: |
|
|
This tool is intended to assist in calculating the supp spacing. Although we aim for accuracy, we make no guarantees regarding the completeness, correctness, or timeliness of the results. |
|
|
Users are solely responsible for providing accurate input to ensure valid results. |
|
|
We accept no liability for any decisions made based on the results of this tool, or for any direct or indirect damages resulting from its use |
|
|
The selection of 'brand of application' is provided solely for user convenience. No brand preference, endorsement, or affiliation is implied or intended by PVX Mounting Systems. |
|
|
Page: 1/1 |
|
|
Calculator Roof Zone |
|
|
Project name: |
|
|
Enter the fields below to calculate the roof zone of your project: |
|
|
Building length (m) |
|
|
Buliding widht (m) |
|
|
Building hight (m) |
|
|
Distance from cable route to roof edge (m) |
|
|
ZONE |
|
|
If the zone above is 'F/G', complete the field below to determine whether it is 'F' or 'G' |
|
|
Distance from cable route to corner (m) |
|
|
ZONE |
|
|
Date: |
|
|
Version number: |
3.0 |
|
page 1/1 |
|